Homebuilt Hardware


dspicVCDO

Posted in Synth DIY by ryan on the August 14th, 2008

I have built a digital VCO with a dspic30f3013. It is a numerically controlled oscillator (NCO) with the exponential conversion performed in the dspic using a lookup table. The NCO phase is used to lookup a triangle waveform. The triangle wave is output through an 8bit R2R DAC. The normal VCO waveforms, sine, sawtooth, and PWM, are generated using analog circuitry. For this first version, I wanted to create a traditional VCO, but future versions may include additional waveforms.

project page